SK 20200211 -I have confirmed all distances in this sequence relative to Q1 using ART2082.dwg. ALTIS:Q1-3 effective lengths confirmed by Suresh on 20200224. All other effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence appears to start near (but not exactly) ALTIS:EMIT at coordinates X = 1266498.875 mm Y = 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Location of Q1X and Q1Y is false to allow for separate element of type ecb Q1 is actually a steering quad, so the steering is from asymmetry in the quad electrode voltages. ! FIT at the start of a periodic section call twissmatch(1,-2.1717,85.424,10.,1) call twissmatch(3,2.1717,85.424,10.,1) call fringeQ(0.0872,-0.0009,0.0298,-0.230) Sequence ends at the edge of ALTS:B4 closer to ALTS:Q5. Coordinates of that on ART2082.dwg are: X: 1216910.5 mm Y: 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200211 - I have confirmed all distances in this sequence using ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the edge of ALTS:B4 closer to ALTS:Q5. Coordinates of that on ART2082.dwg are: X: 1216910.5 mm Y: 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. ! FIT at the start of a periodic section call twissmatch(1,-2.1717,85.424,10.,1) call twissmatch(3,2.1717,85.424,10.,1) SK 20200225 - LPM9 position on ART2082.dwg is incorrect as per Suresh. using Q9 to LPM9 distance e-mailed to me by Suresh based on a manufacturer's drawing of LPM9 diagnostics box. ! FIT at the start of a periodic section call fit(1,2,1,0.,1,1) call fit(1,4,3,0.,1,1) ! FIT at the start of a periodic section call twissmatch(1,2.1717,85.424,1.,1) call twissmatch(3,-2.1717,85.424,1.,1) Sequence ends at the downstream edge of the ALTS:Q12 skimmer Coordinates of that on ART2082.dwg are: X: 1154157.875 mm Y: 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200225 - I have confirmed all distances in this sequence using ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the downstream edge of the ALTS:Q12 skimmer Coordinates of that on ART2082.dwg are: X: 1154157.875 mm Y: 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. ! FIT at the start of a periodic section call twissmatch(1,2.1717,85.424,10.,1) call twissmatch(3,-2.1717,85.424,10.,1) ! FIT at the start of a periodic section call twissmatch(1,-2.1717,85.424,10.,1) call twissmatch(3,2.1717,85.424,10.,1) SK 20200225 - LPM19 position on ART2082.dwg is incorrect as per Suresh. using Q19 to LPM19 distance e-mailed to me by Suresh based on a manufacturer's drawing of LPM19 diagnostics box. Sequence ends at the downstream edge of the ALTS:Q20 skimmer Coordinates of that on ART2082.dwg are: X: 1154157.875 mm Y: 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200225 - I have confirmed all distances in this sequence using ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the downstream edge of the ALTS:Q20 skimmer Coordinates of that on ART2082.dwg are: X: 1154157.875 mm Y: 2314337.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200225 - PM2 position on ART2082.dwg is incorrect as per Suresh. using Q2 to PM2 distance e-mailed to me by Suresh based on a manufacturer's drawing of PM2 diagnostics box. Sequence ends at the upstream edge (closer to ALTSW:B4) of the ALTW:Q33 skimmer Coordinates of that on ART2082.dwg are: X: 1032298.1875 mm Y: 2334597.25 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200225 - I have confirmed all distances in this sequence using ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the upstream edge of the ALTW:Q33 skimmer Coordinates of that on ART2082.dwg are: X: 1032298.1875 mm Y: 2334597.25 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200225 - LPM41 position on ART2082.dwg is incorrect as per Suresh. using Q41 to LPM41 distance e-mailed to me by Suresh based on a manufacturer's drawing of LPM41 diagnostics box. SK 20200225 - PM43 position on ART2082.dwg is incorrect as per Suresh. using Q43 to PM43 distance e-mailed to me by Suresh based on a manufacturer's drawing of PM43 diagnostics box. Sequence ends at the downstream edge of the ALTW:Q44 skimmer Coordinates of that on ART2082.dwg are: X: 1032298.1875 mm Y: 2446477.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 202000225 - Distances verified comparing to ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the downstream edge of the ALTW:Q44 skimmer Coordinates of that on ART2082.dwg are: X: 1032298.1875 mm Y: 2446477.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. call fit(1,2,1,0.,10,1) call fit(1,4,3,0.,10,1) call fit(2,2,6,0.,10,1) Sequence ends at the downstream edge (closer to ALTN:Q2) of ALTWN:B4 Coordinates of that on ART2082.dwg are: X: 1050886.0 mm Y: 2466737.5 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 202000225 - Distances verified comparing to ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the downstream edge (closer to ALTN:Q2) of ALTWN:B4 Coordinates of that on ART2082.dwg are: X: 1050886.0 mm Y: 2466737.5 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. call twissmatch(1,-2.1717,85.424,10.,1) call twissmatch(3,2.1717,85.424,10.,1) call fit(1,2,1,0,1,1) call fit(1,4,3,0,1,1) Sequence ends at the upstream edge (closer to ALTN:Q9) of ALTNS:B1 Coordinates of that on ART2082.dwg are: X: 1115310.5 mm Y: 2466737.5 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 202000225 - Distances verified comparing to ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the upstream edge (closer to ALTN:Q9) of ALTNS:B1 Coordinates of that on ART2082.dwg are: X: 1115310.5 mm Y: 2466737.5 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. ! FIT at the start of a low beta insertion call twissmatch(1,0.,24.,10,1) call twissmatch(3,0.,24.,10,1) Sequence ends at the upstream edge (closer to AHRSN:B4) of the ALTN:Q16 skimmer. Coordinates of that on ART2082.dwg are: X: 1154158.0 mm Y: 2466737.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 202000226 - Distances verified comparing to ART2082.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the upstream edge (closer to AHRSN:B4) of the ALTN:Q16 skimmer. Coordinates of that on ART2082.dwg are: X: 1154158.0 mm Y: 2466737.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. ! FIT at the start of a periodic section call twissmatch(1,-2.1717,85.424,10.,1) call twissmatch(3,2.1717,85.424,10.,1) ! FIT at the start of a periodic section call fit(1,2,1,0,1,1) call fit(1,4,3,0,1,1) Sequence ends at the upstream edge (closer to ALTN:B33) of the AVTE:DEFL0 skimmer. Coordinates of that on ART2081.dwg are: X: 1718849.2 mm Y: 1889773.875 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 202000225 - All distance confirmed in comparison to ART2081.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the upstream edge (closer to ALTN:B33) of the AVTE:DEFL0 skimmer. Coordinates of that on ART2081.dwg are: X: 1718849.2 mm Y: 1889773.875 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Sequence ends at the upstream edge of the AVTE:DEFL14 skimmer Coordinates of that on ART2081.dwg are: X: 1719031.75 mm Y: 2044868.875 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200211 - I have confirmed all distances in this sequence relative to DEFL14 using ART2081.dwg. Sequence ends at the upstream edge of the AVTE:DEFL14 skimmer Coordinates of that on ART2081.dwg are: X: 1719031.75 mm Y: 2044868.875 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Sequence ends at the downstream edge of AVTES:B4 (closer to AGTE:Q14) Coordinates of that on ART2081.dwg are: X: 1737618.5 mm Y: 2068758.5 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200228 - I have confirmed all distances in this sequence using ART2080.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the edge of AGTEN:B4 closer to AGTE:Q13. Coordinates of that on ART2080.dwg are: X: 1592957.0 mm Y: 2262221.25 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Sequence ends at the edge of AVTES:B4 closer to AGTE:Q14. Coordinates of that on ART2080.dwg are: X: 1592957.25 mm Y: 2275847.0 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200228 - I have confirmed all distances in this sequence using ART2080.dwg. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the edge of IGTAE:B4 closer to AGTE:Q9. Coordinates of that on ART2080.dwg are: X: 1592957.125 mm Y: 2208290.5 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Sequence ends at the edge of AGTEN:B4 closer to AGTE:Q13. Coordinates of that on ART2080.dwg are: X: 1592957.0 mm Y: 2262221.25 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK - All optics positions verified 20200903. All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the edge of AGTE:B1 closer to AGTS:Q13. Coordinates of that on ART2080.dwg are (measured using e drawings PRO): X: 1611544.625 mm Y: 2138902.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Sequence ends at the downstream (closer to AGTY:B1) edge of the AGTS:Q20 skimmer. Coordinates of that on ART2080.dwg are (measured using e drawings PRO): X: 1672951.25 mm Y: 2138902.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK 20200226: All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf NOTHING ELSE CHECKED. Sequence starts at the downstream (closer to AGTY:B1) edge of the AGTS:Q20 skimmer. Coordinates of that on ART2080.dwg are: X: 1672951.25 mm Y: 2138902.75 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. Sequence ends at the downstream (closer to AGTY:Q13) edge of AGTNY:B4. Coordinates of that on ART2080.dwg are: X: 1693204.125 mm Y: 2262221.25 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. SK - All optics positions verified 202000226 All quad effective lengths confirmed based on TRI-BN-19-22 by Rick Baartman: http://lin12.triumf.ca/text/design_notes/b2019_22/note.pdf Sequence starts at the downstream (closer to AGTY:Q13) edge of AGTNY:B4. Coordinates of that on ART2080.dwg are: X: 1693204.125 mm Y: 2262221.25 mm Note that the units on this drawing appear to be messed up. To get an actual distance in mm the units given on drawing need to be divided by 25.4. call FIT( 1, 1, 1, 0.000, 10.000, 1) call FIT( 1, 3, 3, 0.000, 10.000, 1)