REFERENCES Design drawings: ISK4369D-revG sequences includes RFQ for future addition, however for now running tune from TRFC:SK4 which is the skimmer after the RFQ, giving offset of 793.171mm. The coordinates of this starting point on ISK4369D are x = -0.01242" y = 96.10919" sequence begins on TRFC:SK3B on ISK4369D, top blue line of skimmer after decelerator x = -0.01242" y = 64.81948" -meagan no way to model rfq cooler in transoptr yet, put in as a marker to show where it lies on beamline -meagan all simulations should start from here (skimmer at exit of RFQ) -meagan electrode before drift tube, name in progress :) -meagan start point for comparing to rick's asymetrical section transoptr file -meagan start point for comparing to rick's first lens after rfq transoptr file -meagan sequence ends at end of faraday cage enclosing rfq and einsel lens x = -0.01342" y = 121.48306" distance from TRFC:SK4 (total path length) is 645.452mm total distance from TIS anode: 4912.044mm -meagan REFERENCES Design drawings: ISK4369D-revG sequence begins at end of rfq/enizel lens enclosure, before isolation valve on ISK4369D at x = -0.01342" y = 121.48306" -meagan copied and pasted epics information from another IV, unsure if the same for this IV or if these values are in epics. length slightly unclear in drawing, however confident to within a centimetre assume pretty much all epics tags have been copied and pasted over from the same element in a different sequence -meagan unsure of epics pv's for an mcp -meagan einzel lens has replaced steerer -meagan call fit(1,1,1,0.3,1,1) call fit(1,3,3,0.3,1,1) also unsure of this ecb length -meagan sequences ends at end of deflector TRFCBL:YCB4 coordinates on ISK4369D: x = -35.78747" y = 173.13889" coordinates on IEX0695D: x = 274.711" y = 132.301" distance from TRFC:SK4 (total path length) is 2474.161mm total distance from TIS anode: 6740.753mm -meagan REFERENCES Design drawings: IEX0695D-revA ISK4457D-rev3 attribute measurements of einzel lenses made from IEX0742C, IEX0724C, and IEX0696C sequence begins at end of deflector TRFCBL:YCB4 coordinates on ISK4369D: x = -35.78747" y = 173.13889" coordinates on IEX0695D: x = 274.711" y = 132.301" -meagan unsure about the length of isolation valve call fit(1,1,1,0.4,1,1) call fit(1,3,3,0.4,1,1) call fit(1,1,1,0.4,1,1) call fit(1,3,3,0.4,1,1) EL1 on both drawings, but bender and xcb not on IEX0695D so I measured backwards on ISK4457D from the EL to get the s value of the xcb -meagan unsure of epics pv's for an mcp -meagan sequences ends at end of deflector TSYBL:XCB4 end coordinates on ISK4457D: x = -367.714" y = -364.493" distance from TRFC:SK4 (total path length) is 4388.950mm -meagan REFERENCES Design drawings: ISK4457D-rev3 sequence starts at end of deflector TSYBL:XCB4 coordinates on ISK4457D: x = -367.714" y = -364.493" -meagan unsure whether or not "quadratic bender" is able to be produced in transoptr -meagan unsure of FC epics tags -meagan the sequences ends at the middle of EBIT:IV0 end coordinates on ISK4457D: x = -367.728" y = -307.899" distance from TRFC:SK4 (total path length) is 5523.746mm -meagan REFERENCES Design drawings: ISK4457D-rev3 sequence starts in the middle of EBIT:IV0 coordinates on ISK4457D: x = -367.728" y = -307.899" -meagan unsure of FC epics tags -meagan unsure whether or not "quadratic bender" is able to be produced in transoptr -meagan the sequences ends at the end of the EBITBL:IV0 platform end coordinates on ISK4457D: x = -367.726" y = -362.797" distance from TRFC:SK4 (total path length) is 6918.181mm distance from EBIT:IV0 (path length from EBIT) is 1394.435mm -meagan REFERENCES Design drawings: ISK4457D-rev3 sequence starts at end of EBITBL:IV0 stand coordinates on ISK4457D: x = -367.726" y = -362.797" -meagan unsure of epics pv's for an mcp -meagan EL3 on both drawings, but bender and xcb not on IEX0695D so I measured backwards on ISK4457D from the EL to get the s value of the xcb -meagan sequences ends at end of TSYBL:EL4 (one inch after centre) x = 169.912" y = 132.302" distance from TRFC:SK4 (total path length) is 9580.076mm distance from EBIT:IV0 (path length from EBIT) is 4056.330mm -meagan REFERENCES Design drawings: IEX0695D-revA einzel lens attribute measurements taken from IEX0717C sequence starts at edge of einzel lens TSYBL:EL4 (one inch after centre) on IEX0695D x = 169.912" y = 132.302" -meagan call fit(1,1,1,0.2,1,1) call fit(1,3,3,0.2,1,1) sequence ends on unlabelled diagmostic tool (probably MPETBL:MCP0) that sits on last stand before MPET chamber x = 88.960" y = 132.302" distance from TRFC:SK4 (total path length directly from RFQ) is 7395.438mm distance from TRFC:SK4 (total length through EBIT) is 11839.458mm distance from EBIT:IV0 (path length from EBIT) is 6315.712mm total distance from TIS anode: 9402.648mm -meagan